{"id":8480,"date":"2019-01-14T00:10:42","date_gmt":"2019-01-14T04:10:42","guid":{"rendered":"http:\/\/nycphantom.com\/journal\/?p=8480"},"modified":"2019-01-14T00:12:22","modified_gmt":"2019-01-14T04:12:22","slug":"prevent-drone-crashing-flying-away","status":"publish","type":"post","link":"http:\/\/nycphantom.com\/journal\/?p=8480","title":{"rendered":"Prevent Drone Crashing \/ Flying away"},"content":{"rendered":"\n<p>Someone (msinger) painstakingly compiled this. I'm copying here to prevent broken link in the future. (Source: <a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40\" target=\"_blank\" rel=\"noreferrer noopener\" aria-label=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40 (opens in a new tab)\">https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40<\/a>)<\/p>\n\n\n\n<h1 class=\"wp-block-heading\">Prevent a Crash or Flyaway with Your DJI Drone (The Complete Guide)<\/h1>\n\n\n\n<h2 class=\"wp-block-heading\">Overview<\/h2>\n\n\n\n<p>This guide will teach you everything you need to know about preventing a crash or flyaway with your DJI&nbsp;<strong><a href=\"https:\/\/store.dji.com\/shop\/mavic-series?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Mavic<\/a><\/strong>,&nbsp;<strong><a href=\"https:\/\/store.dji.com\/shop\/phantom-series?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Phantom<\/a><\/strong>, or&nbsp;<strong><a href=\"https:\/\/store.dji.com\/shop\/spark-series?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Spark<\/a><\/strong>. If you follow the advice in this guide, you will learn how to fly your DJI drone safely and will greatly reduce the chance of a flyaway or crash.<\/p>\n\n\n\n<p>The tips have been organized into the following categories to allow you to easily jump to a section of interest:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#getting-started\">Getting Started<\/a><\/strong><\/li><li><strong><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#preflight-checks\">Preflight Checks<\/a><\/strong><\/li><li><strong><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#taking-off-tips\">Taking Off Tips<\/a><\/strong><\/li><li><strong><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#mid-flight-tips\">Mid-flight Tips<\/a><\/strong><\/li><li><strong><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#landing-tips\">Landing Tips<\/a><\/strong><\/li><li><strong><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#safety-tips\">Safety Tips<\/a><\/strong><\/li><\/ul>\n\n\n\n<p>Below is a complete list of tips that'll be covered in this guide. Either scroll down to start at the first tip or click a specific tip to jump to that section of the guide.<\/p>\n\n\n\n<ol class=\"wp-block-list\"><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip1\">Read and understand the&nbsp;<strong>DJI manual<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip2\">Use the battery level indicator in DJI GO to&nbsp;<strong>monitor the battery charge level<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip3\">The&nbsp;<strong>low and critically low battery level settings<\/strong>&nbsp;in DJI GO are only used to display alerts<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip4\">Understand how the&nbsp;<strong>RTH (return to home)<\/strong>&nbsp;feature works<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip5\">Use&nbsp;<strong>OEM DJI props and batteries<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip6\">Some&nbsp;<strong>3rd party props and batteries<\/strong>&nbsp;look a lot like OEM DJI parts<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip7\">Accessories installed below the drone&nbsp;<strong>can trigger the downward sensors<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip8\"><strong>Compass calibration<\/strong>&nbsp;best practices<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip9\">Understanding the current&nbsp;<strong>altitude and VPS altitude<\/strong>&nbsp;values in DJI GO<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip10\">Plan ahead for&nbsp;<strong>tracking a lost drone<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip11\">Power on the&nbsp;<strong>remote controller<\/strong>&nbsp;first and off last<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip12\">Verify the&nbsp;<strong>vision systems<\/strong>&nbsp;are active<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip13\"><strong>Disable Bluetooth and Wi-Fi<\/strong>&nbsp;on nearby electronic devices when flying a drone that uses Wi-Fi<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip14\">Let the battery warm up when&nbsp;<strong>flying in cold weather<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip15\">Ensure the&nbsp;<strong>home point is set<\/strong>&nbsp;before taking off<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip16\">Accidentally flying into a&nbsp;<strong>no fly zone<\/strong>&nbsp;when taking off before GPS data is used<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip17\">Don\u2019t&nbsp;<strong>install new firmware\/software<\/strong>&nbsp;when out in the field or right before heading out<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip18\">Make sure the&nbsp;<strong>props are attached<\/strong>&nbsp;to the correct motors<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip19\">Enable airplane mode on your mobile device to&nbsp;<strong>avoid distractions while flying<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip20\">Use Google Earth to&nbsp;<strong>find high obstacles<\/strong>&nbsp;in unknown flying locations<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip21\">Charge all of your&nbsp;<strong>batteries<\/strong>&nbsp;before flying<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip22\"><strong>Check the weather<\/strong>&nbsp;to find any nearby storms<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip23\">Make sure the drone&nbsp;<strong>battery is secured<\/strong>&nbsp;properly<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip24\">Set the&nbsp;<strong>RTH Altitude<\/strong>&nbsp;before taking off<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip25\"><strong>Cache the maps<\/strong>&nbsp;in DJI GO so they can be used while flying<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip26\">Keep&nbsp;<strong>magnetic metal objects<\/strong>&nbsp;away from your drone while it\u2019s powered on<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip27\">Keep&nbsp;<strong>strong magnets<\/strong>&nbsp;away from your drone at all times<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip28\">Verify the&nbsp;<strong>compass<\/strong>&nbsp;is not being negatively affected by nearby interference<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip29\">Position the&nbsp;<strong>remote controller antennas<\/strong>&nbsp;properly<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip30\">Inspect the&nbsp;<strong>props<\/strong>&nbsp;for damage<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip31\">Make sure the&nbsp;<strong>remote controller sticks<\/strong>&nbsp;are properly calibrated<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip32\">Ascend at&nbsp;<strong>full throttle<\/strong>&nbsp;when taking off<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip33\">Use the&nbsp;<strong>attitude indicator<\/strong>&nbsp;to judge the wind speed<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip34\">Use the&nbsp;<strong>Precision Landing<\/strong>&nbsp;feature to allow for a more accurate auto landing<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip35\">Exiting an&nbsp;<strong>automated flight mode<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip36\">Don\u2019t accidentally initiate&nbsp;<strong>auto land<\/strong>&nbsp;in DJI GO<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip37\">Make it easier to&nbsp;<strong>locate your drone<\/strong>&nbsp;in the sky<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip38\">Don\u2019t fly&nbsp;<strong>close to the surface<\/strong>&nbsp;of the ground or water<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip39\">You\u2019ll likely&nbsp;<strong>lose your drone<\/strong>&nbsp;if it crashes into water<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip40\"><strong>Sensors<\/strong>&nbsp;are not active on all sides of the drone in all flight modes<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip41\">Beware of nearby birds, drones, or other&nbsp;<strong>unknown obstacles<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip42\">Understand how your drone flies when switching between&nbsp;<strong>GPS and ATTI mode<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip43\">Manually&nbsp;<strong>reset the home point<\/strong>&nbsp;after moving away from original home point<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip44\">DJI drones&nbsp;<strong>cannot stop<\/strong>&nbsp;on a dime<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip45\"><strong>Loss of live video<\/strong>&nbsp;doesn\u2019t mean the remote controller is disconnected<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip46\">The&nbsp;<strong>controls are backward<\/strong>&nbsp;when the drone is facing you<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip47\"><strong>Flying toward the sun<\/strong>&nbsp;can trigger the front obstacle sensors<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip48\">Fly&nbsp;<strong>VLOS<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip49\">Always fly&nbsp;<strong>LOS<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip50\">The color of&nbsp;<strong>remote controller light<\/strong>&nbsp;show if it\u2019s connected to the drone<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip51\">Use the&nbsp;<strong>map path feature<\/strong>&nbsp;in DJI GO to navigate back to the home point<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip52\">Use the&nbsp;<strong>attitude indicator<\/strong>&nbsp;to steer your drone to the home point<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip53\">Pay attention to&nbsp;<strong>high wind warnings<\/strong>&nbsp;in DJI GO<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip54\"><strong>Strong wind<\/strong>&nbsp;might prevent your drone from making it back to the home point<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip55\">Use the data on the remote controller screen to&nbsp;<strong>navigate the drone back home<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip56\">Full throttle down can cause an&nbsp;<strong>auto landing<\/strong>&nbsp;when using the Landing Protection feature<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip57\"><strong>Sensors<\/strong>&nbsp;don\u2019t work well at night or in poor lighting conditions<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip58\"><strong>Sensors<\/strong>&nbsp;cannot detect all objects<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip59\"><strong>Automated features<\/strong>&nbsp;are not foolproof<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip60\">Stay clear of&nbsp;<strong>no fly zones<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip61\"><strong>Shutting down DJI GO<\/strong>&nbsp;on your mobile device does not disconnect the remote controller<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip62\">Don\u2019t fly underneath anything that could&nbsp;<strong>block the drone\u2019s GPS signal<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip63\">Pay attention to the&nbsp;<strong>messages displayed in DJI GO<\/strong>&nbsp;while flying<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip64\">Avoid an&nbsp;<strong>accidental CSC<\/strong>&nbsp;mid-flight<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip65\">Don\u2019t assume the&nbsp;<strong>altitude displayed in DJI GO<\/strong>&nbsp;is 100% correct<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip66\">The&nbsp;<strong>RTH button<\/strong>&nbsp;on the remote controller still works after the downlink drops<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip67\">Point the camera down to help&nbsp;<strong>find a safe landing spot<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip68\">Manually&nbsp;<strong>take over landing<\/strong>&nbsp;when the drone is in sight<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip69\">Use a&nbsp;<strong>landing pad<\/strong>&nbsp;for Precision Landing or when landing on undesirable surfaces<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip70\">Point the drone away from you&nbsp;<strong>when landing<\/strong>&nbsp;for easier control<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip71\"><strong>Hand catch<\/strong>&nbsp;your drone if it\u2019s not safe to land on the ground<\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip72\">Don\u2019t&nbsp;<strong>fly indoors<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip73\">Use lights when&nbsp;<strong>flying at night<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip74\">Fly with a&nbsp;<strong>recommended mobile device<\/strong><\/a><\/li><li><a href=\"https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40#Tip75\">Set up your&nbsp;<strong>mobile device<\/strong>&nbsp;properly<\/a><\/li><\/ol>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Getting Started<\/strong><\/h2>\n\n\n\n<p>Before attempting to fly your DJI drone, here are some important things you should know:<br>&nbsp;<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>1)<\/strong>&nbsp;Read and understand the DJI manual<\/h5>\n\n\n\n<p>The DJI drone manuals are full of great information and a must read if you want to have a deep understanding of how your drone works. The manuals are only available in PDF format and must be downloaded from the download pages in the following sections of the DJI website:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"http:\/\/www.mavichelp.com\/l\/159-Mavic-2-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Mavic 2<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"http:\/\/www.mavichelp.com\/l\/129-Mavic-Pro-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Mavic Pro<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"http:\/\/www.mavichelp.com\/l\/147-Mavic-Air-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Mavic Air<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"https:\/\/www.phantomhelp.com\/l\/154-P4P-V2-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Phantom 4 Pro V2<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"https:\/\/www.phantomhelp.com\/l\/134-P4P-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Phantom 4 Pro<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"https:\/\/www.phantomhelp.com\/l\/140-P4A-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Phantom 4 Advanced<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"https:\/\/www.phantomhelp.com\/l\/124-P4-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Phantom 4<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"https:\/\/https\/\/www.PhantomHelp.com\/l\/2-P3P-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Phantom 3 Professional<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"https:\/\/www.phantomhelp.com\/l\/79-P3A-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Phantom 3 Advanced<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"https:\/\/www.phantomhelp.com\/l\/110-P34K-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Phantom 3 4K<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"https:\/\/www.phantomhelp.com\/l\/151-P3SE-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Phantom 3 SE<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"https:\/\/www.phantomhelp.com\/l\/5-P3S-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Phantom 3 Standard<\/strong>&nbsp;Downloads<\/a><\/li><li><a href=\"http:\/\/www.spark-help.com\/l\/156-Spark-Downloads\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Spark<\/strong>&nbsp;Downloads<\/a><\/li><\/ul>\n\n\n\n<p>Take the time to carefully read the manual in its entirety and learn all of the features and functions within. And read it a second time if you don\u2019t feel like you\u2019ve understood everything the first time around.<strong>Note:<\/strong>&nbsp;DJI created the&nbsp;<strong><a href=\"https:\/\/store.dji.com\/guides\/dji-go-4-manual?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">DJI GO manual<\/a><\/strong>&nbsp;to explain the features of DJI GO. It contains a lot more information than you\u2019ll find about DJI GO in your DJI drone manual.<\/p>\n\n\n\n<p>If you have any questions about anything in your DJI drone manual, please ask for help in the&nbsp;<strong><a href=\"https:\/\/forum.phantomhelp.com\/\" target=\"_blank\" rel=\"noreferrer noopener\">DJI Drone Help forum<\/a><\/strong>. I\u2019m there 7 days a week&nbsp;<em>(along with many other DJI drone owners)<\/em>&nbsp;and it\u2019s a place where you can be sure you\u2019ll receive expert and accurate information about your DJI drones.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>2)<\/strong>&nbsp;Use the battery level indicator in DJI GO to monitor the battery charge level<\/h5>\n\n\n\n<p>The battery level indicator is displayed at the top of DJI GO&nbsp;<em>(see the screenshot below)<\/em>. It shows the current battery charge level and when it\u2019s expected to reach the low battery and critically low battery levels.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Battery-Level-Indicator.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>It\u2019s important to understand when the battery is going to reach these levels since the drone is programmed to return to the home point or auto land at those points.<\/p>\n\n\n\n<p>Watch&nbsp;<strong><a href=\"https:\/\/www.youtube.com\/watch?v=LTQSGLHJI28\" target=\"_blank\" rel=\"noreferrer noopener\">this video<\/a><\/strong>&nbsp;for an explanation of how to use the battery level indicator in DJI GO.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>3)<\/strong>&nbsp;The low and critically low battery level settings in DJI GO are only used to display alerts<\/h5>\n\n\n\n<p>DJI GO contains&nbsp;Low Battery Warning&nbsp;and&nbsp;Critically Low Battery Warning&nbsp;settings&nbsp;<em>(see the screenshot below)<\/em>&nbsp;that allow an alert to be displayed in DJI GO when the current battery charge level reaches those percentage levels.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Battery-Warnings.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>These settings do nothing but display an alert in DJI GO when the battery percentage reaches the set levels. They do not control when the drone starts returning home or auto lands.<br><br>The actual low and critically low battery levels are determined by the drone\u2019s current altitude and distance from the home point and are continuously recalculated throughout the flight. Use the battery level indicator at the top of DJI GO to monitor the battery level and ensure you\u2019re able to get your drone back to the home point by the time the low battery level is reached&nbsp;<em>(or at least before the critically low battery level is reached)<\/em>.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>4)<\/strong>&nbsp;Understand how the RTH (return to home) feature works<\/h5>\n\n\n\n<p>The RTH feature is one of the most complex features of a DJI drone. While it works very well and rarely fails, it can do unexpected things if you\u2019re not sure how it\u2019s supposed to work.<br><br>Here are some important things to know about RTH:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Make sure you\u2019re certain you know where the home point is currently marked before initiating RTH.<\/li><li>RTH can be activated or cancelled from the RTH button&nbsp;<em>(or toggle switch on the P3S or P3SE)<\/em>&nbsp;on the remote controller. Press and hold the RTH button until the remote controller starts beeping to activate RTH. Press and release the RTH button quickly to cancel RTH.<\/li><li>RTH can also be activated and cancelled from the icon on the left side of DJI GO.<\/li><li>When RTH is activated, your drone will ascend from the current altitude displayed at the bottom of DJI GO to your set RTH altitude before returning home. If the current altitude is negative, your drone will ascend to 0 feet and then up to the RTH altitude. If your drone is already above the RTH altitude, it will immediately start returning home at its current altitude.<\/li><\/ul>\n\n\n\n<p>There are many other possible scenarios that could occur when RTH is initiated. Carefully review the RTH section of your DJI manual so you fully understand what to expect.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>5)<\/strong>&nbsp;Use OEM DJI props and batteries<\/h5>\n\n\n\n<p>Batteries and props are the most important drone accessories since they are the two pieces of hardware that are most often involved in drone crashes. While OEM DJI accessories always cost more than 3rd party accessories, they are known to work very well and they will last a long time if you care for them properly.<br><br>If you choose to use 3rd party props or batteries while your drone is still covered under the&nbsp;<strong><a href=\"https:\/\/www.dji.com\/service\/policy?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">DJI warranty<\/a><\/strong>, your warranty might not be honored if you attempt to make a warranty claim and DJI determines the props and\/or battery was to blame. 3rd party props are usually not made as well, are often responsible for erratic\/unstable flight, and have shattered mid-flight in some cases.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>6)<\/strong>&nbsp;Some 3rd party props and batteries look a lot like OEM DJI parts<\/h5>\n\n\n\n<p>If you purchased a used drone or a drone from a seller that is not an&nbsp;<strong><a href=\"https:\/\/www.dji.com\/where-to-buy\/online-retails?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">authorized DJI dealer<\/a><\/strong>, you might have 3rd party props or batteries if your drone came packed in an unsealed box or came with extra props and\/or batteries. Inspect your accessories carefully to ensure you\u2019re using OEM DJI parts&nbsp;<em>(if that\u2019s your goal)<\/em>.<br><br>You can match your accessories up against the accessory photos in the&nbsp;<strong><a href=\"https:\/\/store.dji.com\/?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">DJI Store<\/a><\/strong>&nbsp;to figure out if they are OEM DJI parts. Carefully comparing the photos side-by-side is usually enough to figure out whether or not your accessories are genuine.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>7)<\/strong>&nbsp;Accessories installed below the drone can trigger the downward sensors<\/h5>\n\n\n\n<p>If the&nbsp;Landing Protection&nbsp;setting&nbsp;<em>(see the screenshot below)<\/em>&nbsp;is enabled on your drone&nbsp;<em>(if applicable)<\/em>&nbsp;and any 3rd party accessories are installed below the drone&nbsp;<em>(e.g. extended landing gear)<\/em>&nbsp;or are dangling below the drone&nbsp;<em>(e.g. a tracker antenna)<\/em>, the downward sensors could detect those items as an obstacle and be triggered mid-flight.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Landing-Protection.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>This accidental triggering of the downward sensors could cause the drone to slowly ascend or switch to forced landing mode and start landing. A sign that this is occurring is when the VPS value at the bottom of DJI GO&nbsp;<em>(see the screenshot below)<\/em>&nbsp;is showing a value of less than several feet when the drone is high in the sky&nbsp;<em>(or at least above the range of the downward sensors)<\/em>.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-VPS.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>If you run into this issue, either remove the offending 3rd party accessory or disable the&nbsp;Landing Protection&nbsp;setting if you\u2019d like to keep the 3rd party accessory installed.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>8)<\/strong>&nbsp;Compass calibration best practices<\/h5>\n\n\n\n<p>In most cases, the compass does not need to be calibrated before flying&nbsp;<em>(even when flying in new locations)<\/em>. While calibrating the compass before each flight won\u2019t cause any issues, recalibrating often does not fix\/improve anything.<br><br>See the following compass calibration guides for the best known compass calibration practices:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"http:\/\/www.mavichelp.com\/tips\/dji-mavic-compass-calibration-guide.33\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Mavic<\/strong>&nbsp;Compass Calibration Guide<\/a><\/li><li><a href=\"https:\/\/www.phantomhelp.com\/tips\/dji-phantom-compass-calibration-guide.30\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Phantom<\/strong>&nbsp;Compass Calibration Guide<\/a><\/li><li><a href=\"http:\/\/spark-help.com\/tips\/dji-spark-compass-calibration-guide.34\" target=\"_blank\" rel=\"noreferrer noopener\"><strong>Spark<\/strong>&nbsp;Compass Calibration Guide<\/a><\/li><\/ul>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>9)<\/strong>&nbsp;Understanding the current altitude and VPS altitude values in DJI GO<\/h5>\n\n\n\n<p>The current altitude displayed at the bottom of DJI GO shows the height above the takeoff point&nbsp;<em>(not the height above the ground where the drone is currently flying)<\/em>.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/Diagram-Altitude.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p><strong>Note:<\/strong>&nbsp;As you can see in the diagram above, the altitude might not be a good indication of how high the drone is in the sky when flying over terrain that is not flat.<\/p>\n\n\n\n<p><br>If your drone has downward sensors, DJI GO will also display the VPS altitude at the bottom of DJI GO when the downward sensors are close enough to detect the ground&nbsp;<em>(or closest obstacle)<\/em>&nbsp;below. When the VPS altitude is showing a reading, that\u2019s the best value to use when trying to determine how high your drone is above the closest obstacle below it.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/Diagram-VPS-Altitude.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>Both of these altitudes are estimated using the on board barometer&nbsp;<em>(for the altitude)&nbsp;<\/em>and downward sensors&nbsp;<em>(for the VPS altitude)<\/em>, so you should never assume they are 100% accurate.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>10)<\/strong>&nbsp;Plan ahead for tracking a lost drone<\/h5>\n\n\n\n<p>In many countries&nbsp;<em>(like the US)<\/em>, the law requires hobbyists to fly within VLOS&nbsp;<em>(visual line of sight)<\/em>. That means you must be able to clearly see the drone with your eyes at all times. Even when flying within VLOS, you could lose your drone if it accidentally lands or crashes in grassy terrain or a dense forest&nbsp;<em>(for example)<\/em>.<br><br>Consider using some type of tracker if you\u2019re going to be flying in a location where retrieving a lost drone might be difficult. The&nbsp;<strong><a href=\"https:\/\/www.phantomhelp.com\/Amazon\/E4OrDEcSHQbOIP2\" target=\"_blank\" rel=\"noreferrer noopener\">Marco Polo radio tracker<\/a><\/strong>&nbsp;or&nbsp;<strong><a href=\"https:\/\/www.phantomhelp.com\/Amazon\/E5OcDKJ3JGjSLc2\" target=\"_blank\" rel=\"noreferrer noopener\">Trackimo GPS tracker<\/a><\/strong>&nbsp;are good options if you could potentially be tracking a lost drone from one mile or more away. The&nbsp;<strong><a href=\"https:\/\/www.phantomhelp.com\/Amazon\/E1BOADDEFTZQPH2\" target=\"_blank\" rel=\"noreferrer noopener\">Loc8tor radio tracker<\/a><\/strong>&nbsp;is another good option that can be used to track a drone from up to 400 feet away.<\/p>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Preflight Checks<\/strong><\/h2>\n\n\n\n<p>These tips will help you prepare your DJI drone for its next flight:<br>&nbsp;<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>11)<\/strong>&nbsp;Power on the remote controller first and off last<\/h5>\n\n\n\n<p>Get into the habit of making sure the remote controller is always powered on&nbsp;<strong>before<\/strong>&nbsp;the drone is powered on and powered off&nbsp;<strong>after<\/strong>&nbsp;the drone is powered off.<br><br>When flying your drone, RTH will be initiated if the remote controller connection is lost&nbsp;<em>(like when the remote controller is powered off)<\/em>. While powering off the remote controller shouldn\u2019t cause any problems when the drone is on the ground, there have been rare cases where drones have lifted off and attempted to return home. So, play it safe and make sure the remote controller is powered on any time the drone is powered on.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>12)<\/strong>&nbsp;Verify the vision systems are active<\/h5>\n\n\n\n<p>The vision systems icon at the top of DJI GO&nbsp;<em>(see the screenshot below)<\/em>&nbsp;shows whether or not the various drone sensors are being used to detect and\/or avoid obstacles. The icon will be green when the sensors are active and red when they are inactive.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Vision-Systems.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>If flying in poor lighting conditions, the sensors will be auto disabled. If you\u2019re going to be relying on obstacle avoidance to help you during your flight, then double-check that the sensors are turned on and active before taking off.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>13)<\/strong>&nbsp;Disable Bluetooth and Wi-Fi on nearby electronic devices when flying a drone that uses Wi-Fi<\/h5>\n\n\n\n<p>When flying a drone that uses Wi-Fi&nbsp;<em>(like the&nbsp;<strong><a href=\"https:\/\/www.dji.com\/spark?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Spark<\/a><\/strong>&nbsp;and&nbsp;<strong><a href=\"https:\/\/www.dji.com\/mavic-air?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Mavic Air<\/a><\/strong>)<\/em>, nearby Bluetooth or Wi-Fi signals can interfere with the remote controller\u2019s connection to the drone. That could create a weak signal, limit your max distance, and\/or disconnect the signal and cause RTH to be initiated. To prevent any potential issues, enabled airplane mode on other nearby electronic devices or power them down.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>14)<\/strong>&nbsp;Let the battery warm up when flying in cold weather<\/h5>\n\n\n\n<p>When flying in cold weather, it\u2019s important to keep the batteries warm. Store the batteries in a warm place&nbsp;<em>(like your pockets)<\/em>&nbsp;or in some kind of container that\u2019s capable of trapping heat&nbsp;<em>(like in a thermal container)<\/em>.<br><br>After taking off, ascend to about 10 feet and let your drone hover in place for a minute or two so the battery has time to warm up.<strong>Note:<\/strong>&nbsp;Batteries will not last as long when flying in cold weather, so plan ahead to make sure your drone is able to make it back to the home point in time.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>15)<\/strong>&nbsp;Ensure the home point is set before taking off<\/h5>\n\n\n\n<p>If your drone is connected to enough GPS satellites, the home point will be automatically set when the motors are started. DJI GO normally announces when the home point has been set&nbsp;<em>(if the volume is turned up on your mobile device)<\/em>, but you should also look at the map in DJI GO to verify the home point has been set. The home point will appear on the map with an \"H\" symbol like this:<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Home-Point-Marked.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>Verify that the \u201cH\u201d symbol is displayed on the map and that it\u2019s in the correct location. If the home point has not been marked due to a poor GPS connection, then it would be safest to wait until it has been marked&nbsp;<em>(or try manually setting it)<\/em>.<br><br>If you must take off before the home point can be set, the home point will be automatically set at the drone\u2019s current location mid-flight as soon as it\u2019s able to connect to enough GPS satellites. That location might not be a desirable landing spot, so you should manually reset the home point if that happens.<strong>Note:<\/strong>&nbsp;If RTH is initiated before the home point has been set, your drone will automatically land at its current location&nbsp;<em>(since there is no home point to return to)<\/em>.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>16)<\/strong>&nbsp;Accidentally flying into a no fly zone when taking off before GPS data is used<\/h5>\n\n\n\n<p>As long as the GPS receiver in the drone is connected to enough satellites, the drone will be able to track its current location and prevent you from flying into a no fly zone. If your drone manages to fly into a no fly zone while flying in ATTI mode&nbsp;<em>(flying without GPS assistance)<\/em>&nbsp;and it realizes it\u2019s in a no fly zone after it starts using its GPS data&nbsp;<em>(when switching from ATTI mode to GPS mode)<\/em>, it will auto land at its current location.<br><br>Check the GEO Zones map in following section of DJI GO before taking off so you\u2019re aware if there are any no fly zones nearby:<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-GEO-Zones.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p><strong>Note:<\/strong>&nbsp;The GEO Zones map is also available on DJI\u2019s website&nbsp;<strong><a href=\"https:\/\/www.dji.com\/flysafe\/geo-map?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">here<\/a><\/strong>.<\/p>\n\n\n\n<p>It\u2019s also important to make sure you do not get into a situation where a no fly zone comes between you and the drone\u2019s current location. If RTH is initiated in that situation, the drone would approach the no fly zone and stop once it reaches it since it\u2019s not able to fly into that location. It would then eventually auto land at its current location when the battery reaches the critically low level.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>17)<\/strong>&nbsp;Don\u2019t install new firmware\/software when out in the field or right before heading out<\/h5>\n\n\n\n<p>DJI firmware and software updates are optional, so don\u2019t be in a rush to install them when you haven\u2019t set aside sufficient time. And don\u2019t install those updates right before heading out for an important flight&nbsp;<em>(just in case something doesn\u2019t update as expected)<\/em>.<br><br>After installing new updates, take the time to review everything to ensure all is ready to go for your next flight. Installing new firmware usually resets the settings on the drone, batteries, and remote controller, so double check all of your settings in DJI GO after installing new firmware.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>18)<\/strong>&nbsp;Make sure the props are attached to the correct motors<\/h5>\n\n\n\n<p>On most DJI drone models, it\u2019s not possible to easily attach the props to the wrong motors. However, if you somehow manage to do that, your drone will most likely tip over&nbsp;on takeoff and the props will strike the ground.<br><br>The props and motors are color coded so you can easily match up the props to the correct motors. Your DJI drone manual will contain a section like this that explains how to attach the props:<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-Manual-Attaching-The-Props.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>19)<\/strong>&nbsp;Enable airplane mode on your mobile device to avoid distractions while flying<\/h5>\n\n\n\n<p>If you don\u2019t want phone calls, text messages, or Internet connected apps to interrupt you while flying, enable airplane mode on your mobile device before taking off.<strong>Note:<\/strong>&nbsp;Your drone is flown with the remote controller, so an incoming phone call or text message on your mobile device will not prevent you from controlling your drone&nbsp;<em>(even if DJI GO is minimized)<\/em>. You\u2019ll be able to control your drone as long as the remote controller is connected to the drone.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>20)<\/strong>&nbsp;Use Google Earth to find high obstacles in unknown flying locations<\/h5>\n\n\n\n<p>Before flying in an unknown location, you should scout it out so you\u2019re aware of any nearby obstacles or areas where it's not safe to fly. In many locations,&nbsp;<strong><a href=\"https:\/\/www.google.com\/earth\/desktop\" target=\"_blank\" rel=\"noreferrer noopener\">Google Earth<\/a><\/strong>&nbsp;can be used to vritually fly over the area and estimate the elevation of the surrounding terrain and obstacles.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>21)<\/strong>&nbsp;Charge all of your batteries before flying<\/h5>\n\n\n\n<p>Fully charge the drone batteries you\u2019re going to use the day before or day of your next planned flight. While it\u2019s okay to fly with a remote controller or mobile device that\u2019s not fully charged, you should make sure both are sufficiently charged for the flight(s) you have planned.<strong>Note:<\/strong>&nbsp;Your drone will auto land at its current location if the battery reaches the critically low level mid-flight. Always starting with a fully charged drone battery will help ensure the critically low battery level is not reached sooner than expected.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>22)<\/strong>&nbsp;Check the weather to find any nearby storms<\/h5>\n\n\n\n<p>Flying in rainy\/windy conditions can be dangerous. Make sure you check the weather forecast so you don\u2019t accidentally get caught in a storm mid-flight.<strong>Note:<\/strong><strong><a href=\"https:\/\/darksky.net\/app\" target=\"_blank\" rel=\"noreferrer noopener\">Dark Sky<\/a><\/strong>&nbsp;can be installed on both Apple and Android moble devices. It's a good source of hyperlocal weather information and it offers down-to-the-minute forecasts. You\u2019ll be able to see exactly when the rain will start or stop, right where you're standing.<\/p>\n\n\n\n<p><strong><a href=\"http:\/\/www.singerscreations.com\/WeatherWatcher\" target=\"_blank\" rel=\"noreferrer noopener\">Weather Watcher<\/a><\/strong>&nbsp;can be installed on any Windows computer. It's a good option if you'd prefer to watch the weather from your home computer.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>23)<\/strong>&nbsp;Make sure the drone battery is secured properly<\/h5>\n\n\n\n<p>Many DJI drones can be powered on even when the battery is not secured properly. The fact that the drone is powered on is not a sign that the battery is secured properly. It\u2019s important to ensure the clips on the sides of the battery are properly snapped into the the drone\u2019s battery compartment so the battery is not able to slide out mid-flight.<strong>Note:<\/strong>&nbsp;If the battery disconnects mid-flight, the drone will drop like a rock from the sky. Such an incident will likely result in a lost drone or a repair bill that costs more than the drone is worth.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>24)<\/strong>&nbsp;Set the RTH altitude before taking off<\/h5>\n\n\n\n<p>Before taking off, check the&nbsp;Return-to-Home Altitude&nbsp;setting in DJI GO to ensure it's set high enough for the area where you'll be flying. Find the tallest obstacle above the takeoff point, and set it to 50 feet above that height. The altitude is usually not 100% accurate, so that extra 50 feet of padding will account for any error in that estimation.<strong>Note:<\/strong>&nbsp;The&nbsp;Return-to-Home Altitude&nbsp;setting is always displayed in meters. Since there is no way to change it to feet, you must always set it in meters.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>25)<\/strong>&nbsp;Cache the maps in DJI GO so they can be used while flying<\/h5>\n\n\n\n<p>When flying with a mobile device that\u2019s not connected to the Internet, the maps in DJI GO will not be displayed if they have not been cached&nbsp;<em>(downloaded and stored locally)<\/em>. If you know your mobile device won\u2019t be connected to the Internet while flying, then cache the maps in DJI GO&nbsp;<strong><a href=\"https:\/\/forum.phantomhelp.com\/t\/how-to-cache-the-maps-in-dji-go\/592\" target=\"_blank\" rel=\"noreferrer noopener\">like this<\/a><\/strong>&nbsp;in a location where you have Internet access before heading out to fly.<br><br>Having the maps will allow you to do a few vital things like verify the home point is set in the correct location on the map and see the last known location on the map via the&nbsp;<strong><a href=\"https:\/\/www.youtube.com\/watch?v=pcd69IBvffU\" target=\"_blank\" rel=\"noreferrer noopener\">Find My Drone<\/a><\/strong>&nbsp;feature if you happen to lose your drone mid-flight.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>26)<\/strong>&nbsp;Keep magnetic metal objects away from your drone while it\u2019s powered on<\/h5>\n\n\n\n<p>Magnetic metal objects that come too close to the drone will negatively affect the compass. That will confuse the drone and make it impossible for it to determine which direction it\u2019s facing.<br><br>To avoid a potential issue, power on your drone when it\u2019s sitting on the ground in a location that you know is free of any nearby magnetic metal objects. Keep in mind that metal could be hiding in nearby objects&nbsp;<em>(like rebar in a concrete sidewalk or driveway)<\/em>.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>27)<\/strong>&nbsp;Keep strong magnets away from your drone at all times<\/h5>\n\n\n\n<p>Never store your drone near magnets like a subwoofer in a car or on top of a home theater speaker. That could cause the compass to be permanently magnetized until it has been manually&nbsp;<strong><a href=\"https:\/\/en.wikipedia.org\/wiki\/Degaussing\" target=\"_blank\" rel=\"noreferrer noopener\">degaussed<\/a><\/strong>.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>28)<\/strong>&nbsp;Verify the compass is not being negatively affected by nearby interference<\/h5>\n\n\n\n<p>Check the status message at the top of DJI GO and make sure it\u2019s not reporting a magnetic interference error&nbsp;<em>(like in the screenshot below)<\/em>. If you see this warning, that\u2019s a sign that your drone is near some type of magnetic metal object. After moving your drone to a different location, that warning message should go away.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Magnetic-Field-Interference.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>DJI GO does not always show a warning when the compass is being negatively affected by some type of external magnetic force. So, it\u2019s important to always do these checks before taking off:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>When your drone is on the ground at the takeoff spot, look at the map in DJI GO and verify that the red aircraft symbol is pointing in the same direction as the drone. If the drone and arrow are not both pointing in the same direction, that\u2019s a sign that your drone is near some type of magnetic metal object.<\/li><li>Make sure the red aircraft symbol in DJI GO is not slowly rotating as your drone is sitting on the ground. If the red aircraft symbol is rotating, that\u2019s a sign that your drone is near some type of magnetic metal object.<\/li><\/ul>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>29)<\/strong>&nbsp;Position the remote controller antennas properly<\/h5>\n\n\n\n<p>The remote controller antennas need to be positioned as shown below so the signal remains strong between the drone and remote controller. You might need to reposition the remote controller antennas mid-flight depending on where the drone is positioned in relation to your current location.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/RC-Antenna-Position.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>Watch&nbsp;<strong><a href=\"https:\/\/www.youtube.com\/watch?v=EHoGvvCbukA\" target=\"_blank\" rel=\"noreferrer noopener\">this video<\/a><\/strong>&nbsp;for to see an example of how the remote controller signal is emitted when the antennas are positioned at various angles.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>30)<\/strong>&nbsp;Inspect the props for damage<\/h5>\n\n\n\n<p>Carefully check the props for damage prior to each flight. Make sure the edges of the prop are not chipped or cracked and check the hub area&nbsp;<em>(center of the prop)<\/em>&nbsp;on the top and bottom for any cracks or wear. Replace any props that show any signs of damage.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>31)<\/strong>&nbsp;Make sure the remote controller sticks are properly calibrated<\/h5>\n\n\n\n<p>If the remote controller is not calibrated properly, the drone could drift when the sticks are in the center of the remote controller or it might not respond quite as expected when the sticks are moved.<br><br>When the remote controller sticks and wheel(s) are properly calibrated, the current stick\/wheel locations will show 0% in all locations&nbsp;<em>(as long as the remote controller sticks are in the center positions)<\/em>&nbsp;when viewed in the following section of DJI GO:<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-RC-Stick-Calibration.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p><strong>Note:<\/strong>&nbsp;The above section of DJI GO can only be accessed if the drone is powered down and the remote controller is connected to DJI GO.<\/p>\n\n\n\n<p><br>In this example, you can see the right remote controller stick needs to be calibrated:<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-RC-Stick-Needs-Calibrated.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Taking Off Tips<\/strong><\/h2>\n\n\n\n<p>Use these tips to safely get your DJI drone off the ground:<br>&nbsp;<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>32)<\/strong>&nbsp;Ascend at full throttle when taking off<\/h5>\n\n\n\n<p>The ground is the largest obstacle you\u2019ll encounter when flying. In order to get your drone away from the ground as quickly as possible, move the throttle stick to the full up position until you drone is about 10 feet above the ground when taking off. At that point, your drone will be safely hovering above the ground and you can perform any needed preflight checks.<strong>Note:<\/strong>&nbsp;DJI GO has an auto takeoff feature that allows the drone to automatically take off and hover above the ground. While this feature is usually safe to use, you won\u2019t be 100% in control of your drone like when using any of its other automated functions.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>33)<\/strong>&nbsp;Use the attitude indicator to judge the wind speed<\/h5>\n\n\n\n<p>The wind high up in the sky is usually a lot stronger than the wind on the ground. You can use the attitude indicator in DJI GO to judge the strength of the wind by how much the drone tilts as it hovers in place. Watch&nbsp;<strong><a href=\"https:\/\/www.youtube.com\/watch?v=67FUSGmeg8g\" target=\"_blank\" rel=\"noreferrer noopener\">this video<\/a><\/strong>&nbsp;for an explanation of how to use the attitude indicator.<br><br>Your drone won\u2019t be able to travel as fast when it\u2019s flying into a strong head wind. If it\u2019s flying slower than usual, that\u2019s another indication that the wind is strong.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>34)<\/strong>&nbsp;Use the Precision Landing feature to allow for a more accurate auto landing<\/h5>\n\n\n\n<p>When flying a drone that\u2019s equipped with Precision Landing&nbsp;<em>(like the&nbsp;<strong><a href=\"https:\/\/www.dji.com\/mavic?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Mavic Pro<\/a><\/strong>&nbsp;and&nbsp;<strong><a href=\"https:\/\/www.dji.com\/mavic-air?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Mavic Air<\/a><\/strong>)<\/em>, you can enable the&nbsp;Precision Landing&nbsp;setting in DJI GO&nbsp;<em>(see the screenshot below)<\/em>&nbsp;to allow the drone to land closer to the marked home point when it returns to the home point automatically.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Precision-Landing.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>After enabling the&nbsp;Precision Landing&nbsp;setting, you just need to make sure you ascend straight up over top of the takeoff point for at least 23 feet before moving the drone horizontally. That will allow the downward vision system to scan the ground below and remember the location of the drone so it\u2019s able to land in the same spot when it returns.<br><br>This feature could be useful if your drone gets into a situation where it needs to automatically return home and land. You might not be able to take over control in such a case, so this will ensure your drone is able to land as close to the home point as possible.<strong>Note:<\/strong>&nbsp;If you're flying the Mavic 2 Pro or Mavic 2 Zoom, the&nbsp;Precision Landing&nbsp;setting will not be available in DJI GO. Precision Landing is automatically enabled when using firmware 1.00.02.00 (or higher). See more details&nbsp;<strong><a href=\"https:\/\/www.djidronenews.com\/how-to-use-precision-landing-with-the-mavic-2-pro-zoom\" target=\"_blank\" rel=\"noreferrer noopener\">here<\/a><\/strong>.<\/p>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Mid-flight Tips<\/strong><\/h2>\n\n\n\n<p>Use these tips to ensure a safe flight with your DJI drone:<br>&nbsp;<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>35)<\/strong>&nbsp;Exiting an automated flight mode<\/h5>\n\n\n\n<p>If you run into trouble when flying with an automated flight mode&nbsp;<em>(like ActiveTrack)<\/em>, toggle the flight mode switch&nbsp;<em>(or sport mode switch)<\/em>&nbsp;to quickly cancel the automated mode and take back full control of the drone. Canceling the flight mode is a better option than attempting to fight the automated flight maneuver with the remote controller sticks.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>36)<\/strong>&nbsp;Don\u2019t accidentally initiate auto land in DJI GO<\/h5>\n\n\n\n<p>The RTH and auto land icons are right next to each other on the left side of DJI GO.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Auto-Land-Takeoff-Icons.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>When tapping either icon, DJI GO will display a prompt to allow you to confirm the selected action. Read the prompt carefully before confirming it to ensure you did not accidentally tap the auto land icon when attempting to return the drone to the home point.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>37)<\/strong>&nbsp;Make it easier to locate your drone in the sky<\/h5>\n\n\n\n<p>DJI drones are commonly manufactured in colors that are hard to spot in the sky. You can wrap the outside of your drone in a brightly colored vinyl skin&nbsp;<em>(like a&nbsp;<strong><a href=\"https:\/\/www.decalgirl.com\/skins\/drones\" target=\"_blank\" rel=\"noreferrer noopener\">DecalGirl skin<\/a><\/strong>)<\/em>&nbsp;to make it easier to see. This could also make your drone easier to spot if it crashes and\/or lands in an unexpected location.<br><br>You could also attach strobe lights to the body and\/or legs of your drone to make it easier to see.&nbsp;<strong><a href=\"https:\/\/www.phantomhelp.com\/store\/strobon-cree-led-strobe-light\" target=\"_blank\" rel=\"noreferrer noopener\">STROBON Cree LED strobe lights<\/a><\/strong>&nbsp;are currently the smallest and brightest lights available.&nbsp;<strong><a href=\"https:\/\/www.mavichelp.com\/Amazon\/E4OWDKnGcZTYke2\" target=\"_blank\" rel=\"noreferrer noopener\">Firehouse ARC lights<\/a><\/strong>&nbsp;are another good option since they use the same Creee LED lights.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>38)<\/strong>&nbsp;Don\u2019t fly close to the surface of the ground or water<\/h5>\n\n\n\n<p>The ground is the largest obstacle, so stay clear of it whenever possible. If you must fly close to the ground&nbsp;<em>(or water below)<\/em>, make sure you can clearly see the drone with your eyes. Also, be aware that your drone might descend a little bit when flying quickly along the ground&nbsp;<em>(which could be fatal when flying low)<\/em>.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>39)<\/strong>&nbsp;You\u2019ll likely lose your drone if it crashes into water<\/h5>\n\n\n\n<p>Flying over water is just as safe as flying over ground. The difference is that it\u2019s easy to lose your drone if it crashes into water or auto lands when flying over water.<br><br>Make sure you have sufficient battery power when flying over water and get your drone back to the home point before the battery is too low to make it back. Play it safe and take extra batteries with you so you don\u2019t have to try using every last possible minute of battery power.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>40)<\/strong>&nbsp;Sensors are not active on all sides of the drone in all flight modes<\/h5>\n\n\n\n<p>The sensors on the exterior of the drone used to avoid and\/or detect obstacles are not active on all sides of the drone when using certain flight modes. Also, they can be automatically deactivated if lighting conditions are poor or the drone is tilted at an angle that prevents the sensors from pointing in the direction they are designed to face.<br><br>Carefully read your DJI drone manual so you know when the sensors are active, their effective distance, if they are only designed to detect obstacles&nbsp;<em>(instead of also avoiding them)<\/em>, etc.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>41)<\/strong>&nbsp;Beware of nearby birds, drones, or other unknown obstacles<\/h5>\n\n\n\n<p>If not flying VLOS, you could easily impact other objects in the sky since the live camera view only allows you to see directly ahead of the drone. If you can see your drone with your eyes, you will also be able to see nearby obstacles.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>42)<\/strong>&nbsp;Understand how your drone flies when switching between GPS and ATTI mode<\/h5>\n\n\n\n<p>When your drone is flying in GPS mode&nbsp;<em>(the default mode when it starts)<\/em>, it\u2019ll be able to hover in place and hold both its vertical and horizontal position. When in ATTI mode, the drone will hold its vertical position&nbsp;<em>(like usual)<\/em>, but will drift horizontally with the wind.<br><br>The status at the top of DJI GO will show when the drone is flying in ATTI mode.<br>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-ATTI-Mode.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p><strong>Note:<\/strong>&nbsp;While most DJI drones do not have a remote controller switch that allows the drone to be manually switched to ATTI mode, all DJI drones are able to fly in ATTI mode. ATTI mode is automatically selected if the drone\u2019s GPS receiver is not connected to enough satellites or the compass is not working as expected.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>43)<\/strong>&nbsp;Manually reset the home point after moving away from original home point<\/h5>\n\n\n\n<p>If you move away from the original takeoff point&nbsp;<em>(like when flying from a boat)<\/em>, you should manually reset the home point&nbsp;<em>(as needed)<\/em>&nbsp;to ensure it\u2019s in a safe landing spot. The home point can be reset to your current location&nbsp;<em>(if your mobile device contains a GPS receiver)<\/em>&nbsp;or the drone\u2019s current location. Both of those options can be found in the following section of DJI GO:<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Home-Point-Set.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>Or swipe to the left on your mobile device screen to access those features from this panel:<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Home-Point-Set-2.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p><strong>Note:<\/strong>&nbsp;When flying with a Wi-Fi only mobile device, you could attach a Bluetooth GPS receiver&nbsp;<em>(like&nbsp;<strong><a href=\"https:\/\/www.phantomhelp.com\/Phantom-4-Pro#GPS\" target=\"_blank\" rel=\"noreferrer noopener\">one of these<\/a><\/strong>)<\/em>&nbsp;to your mobile device. That will allow your drone to find your current location and allow you to manually reset the home point to that location mid-flight.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>44)<\/strong>&nbsp;DJI drones cannot stop on a dime<\/h5>\n\n\n\n<p>The time it takes the drone to brake will depend on things like the speed at which it\u2019s flying, whether or not it\u2019s using GPS to hold its position, and your brake setting in the following section of DJI GO:<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Brake.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>You can adjust the brake setting to make your drone stop quicker&nbsp;<em>(which can be violent if you quickly let go of the remote controller sticks)<\/em>&nbsp;or more smoothly&nbsp;<em>(causing the drone to coast as it comes to a stop)<\/em>. Make adjustments to the brake setting while your drone is flying in the sky above all nearby obstacles so you can safely see how it reacts with the new setting in place.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>45)<\/strong>&nbsp;Loss of live video doesn\u2019t mean the remote controller is disconnected<\/h5>\n\n\n\n<p>The uplink&nbsp;<em>(remote controller connection)<\/em>&nbsp;and downlink&nbsp;<em>(video connection)<\/em>&nbsp;travel through different signals between the drone and remote controller. That means it\u2019s possible for the remote controller signal to still be connected even when the live video is no longer displayed in DJI GO.<br><br>Most DJI remote controllers display a green light on the front of the remote controller while the remote controller is connected to the drone. If you\u2019re flying the&nbsp;<strong><a href=\"https:\/\/www.dji.com\/mavic?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Mavic Pro<\/a><\/strong>&nbsp;or&nbsp;<strong><a href=\"https:\/\/www.dji.com\/mavic-2?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Mavic 2<\/a><\/strong>, the screen on the front of the remote controller will show you if the remote controller is connected.<br><br>If you run into this scenario where only the downlink disconnects, you\u2019ll still be able to initiate RTH from the remote controller. If you cannot see your drone and you\u2019re not sure how to pilot it closer to your location&nbsp;<em>(to attempt to reestablish the downlink)<\/em>, then initiating RTH is a good option.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>46)<\/strong>&nbsp;The controls are backward when the drone is facing you<\/h5>\n\n\n\n<p>When the front of the drone is facing you, the remote controller sticks need to be operated in the opposite direction. That means forward becomes backward and left becomes right.<br><br>This can be disorienting if you\u2019re not used to flying drones. Practice in a wide open location until moving the sticks is like riding a bike.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>47)<\/strong>&nbsp;Flying toward the sun can trigger the front obstacle sensors<\/h5>\n\n\n\n<p>When the sun is shining directly into the front sensors, the drone will sometimes detect the sun as an obstacle and prevent you from flying forward. If this happens, you can work around this issue by doing one of the following:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Yaw&nbsp;<em>(turn)<\/em>&nbsp;the drone away from the sun<\/li><li>Fly in a different direction<\/li><li>Disable obstacle avoidance in DJI GO<\/li><\/ul>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>48)<\/strong>&nbsp;Fly VLOS<\/h5>\n\n\n\n<p>Many countries require flying VLOS. This means you need to be able to clearly see the drone with your eyes at all times. Make sure you understand your country\u2019s laws before flying.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>49)<\/strong>&nbsp;Always fly LOS<\/h5>\n\n\n\n<p>Always keep the path between the remote controller and drone clear.<br><br>The remote controller signal will weaken and\/or completely disconnect if an obstacle comes between the remote controller and drone. You should never attempt to fly your drone behind obstacles like a dense patch of trees or around a building.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>50)<\/strong>&nbsp;The color of remote controller light show if it\u2019s connected to the drone<\/h5>\n\n\n\n<p>Most DJI remote controllers display a green light on the front while the remote controller is connected to the drone. You can use that status light to determine if you still have control of the drone in a case where the downlink&nbsp;<em>(video connection)<\/em>&nbsp;drops and the remote controller is still connected to the drone.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>51)<\/strong>&nbsp;Use the map path feature in DJI GO to navigate back to the home point<\/h5>\n\n\n\n<p>As you fly, a flight path will be drawn on top of the map in DJI GO to show where your drone has flown. If you lose sight of your drone, you can retrace that path backwards to bring your drone back to the home point.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Flight-Path.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>52)<\/strong>&nbsp;Use the attitude indicator to steer your drone to the home point<\/h5>\n\n\n\n<p>The altitude indicator in DJI GO can be used to figure out which direction your drone is pointing. With that information, you can navigate your drone back to the home point even in cases where you cannot see it.<br><br>Watch&nbsp;<strong><a href=\"https:\/\/www.youtube.com\/watch?v=67FUSGmeg8g\" target=\"_blank\" rel=\"noreferrer noopener\">this video<\/a><\/strong>&nbsp;for an explanation of how the attitude indicator works in DJI GO.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>53)<\/strong>&nbsp;Pay attention to high wind warnings in DJI GO<\/h5>\n\n\n\n<p>DJI GO will often display a high wind warning when it detects the drone is flying in strong winds. If you see those warnings, it\u2019s a good indication the drone is flying in strong winds&nbsp;<em>(even if the wind is calm on the ground)<\/em>.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Wind-Warning.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>54)<\/strong>&nbsp;Strong wind might prevent your drone from making it back to the home point<\/h5>\n\n\n\n<p>When your drone is flying into a headwind, it will fly slower than usual and will use more battery power than usual. And if the wind is too strong, the drone will move further away from the home point as you attempt to fly home. If run into that scenario, descend to a lower altitude&nbsp;<em>(if it's safe to do so)<\/em>&nbsp;where the wind is not as strong and continue flying home.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>55)<\/strong>&nbsp;Use the data on the remote controller screen to navigate the drone back home<\/h5>\n\n\n\n<p>If the downlink&nbsp;<em>(video disconnects)<\/em>&nbsp;disconnects and the remote controller is still connected to the drone, you can use the data on the remote controller screen&nbsp;<em>(when flying a&nbsp;<strong><a href=\"https:\/\/www.dji.com\/mavic?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Mavic Pro<\/a><\/strong>&nbsp;or&nbsp;<strong><a href=\"https:\/\/www.dji.com\/mavic-2?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">Mavic 2<\/a><\/strong>)<\/em>&nbsp;to navigate your drone back to the home point.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/Mavic-Pro-RC-Distance.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>The distance value at the bottom, right corner of the remote controller screen shows the current distance from the home point to the drone. Fly forward slowly and continue slowly yawing&nbsp;<em>(turning)<\/em>&nbsp;the drone until the distance value starts decreasing. At that point, you\u2019ll know the drone is flying closer to the home point as it moves forward.<strong>Note:<\/strong>&nbsp;Before attempting to blindly fly the drone back to the home point, you should ascend high enough to clear any obstacles the drone could encounter on its way home. Use the altitude value at the bottom of the remote controller screen to see the drone\u2019s current altitude&nbsp;<em>(the altitude above the takeoff point)<\/em>&nbsp;and figure out if its current altitude is too low.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>56)<\/strong>&nbsp;Full throttle down can cause an auto landing when using the Landing Protection feature<\/h5>\n\n\n\n<p>When the&nbsp;Landing Protection&nbsp;setting is enabled in DJI GO, the downward sensors detect the drone is close to the ground, and the throttle stick is in the full down position&nbsp;<em>(all three of those things combined)<\/em>, the drone will auto switch to Forced Landing mode and will automatically descend until it lands. While this normally works as expected&nbsp;<em>(only when the drone is actually near the ground)<\/em>, it could cause the drone to accidentally land in a case where the bottom sensors detect an object below the drone&nbsp;<em>(e.g. extended landing gear)<\/em>&nbsp;as the ground.<br><br>Do one of the following things to prevent a potential disaster like this from occurring:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Disable the&nbsp;Landing Protection&nbsp;setting in DJI GO<\/li><li>Make sure all 3rd party accessories installed below the drone aren\u2019t interfering with the downward sensors<\/li><li>Don\u2019t hold the throttle stick in the full down position in any locations where an accidental auto landing could be fatal&nbsp;<em>(like when flying over water)<\/em><\/li><\/ul>\n\n\n\n<p><strong>Note:<\/strong>&nbsp;If you decide to disable the&nbsp;Landing Protection&nbsp;setting in DJI GO, you\u2019ll have full control of the drone until it touches the ground. You\u2019ll need to go easy on the remote controller sticks when the drone gets close to the ground so it does not slam into the ground.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>57)<\/strong>&nbsp;Sensors don\u2019t work well at night or in poor lighting conditions<\/h5>\n\n\n\n<p>The sensors will most likely be auto disabled or won\u2019t be able to detect obstacles well when flying at night or in poor lighting conditions. Without the use of the sensors, the drone could crash into obstacles that it would normally be able to avoid or might not be as stable as usual when hovering near the ground.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>58)<\/strong>&nbsp;Sensors cannot detect all objects<\/h5>\n\n\n\n<p>The sensors are not able to detect small objects like power lines or small tree branches. Be aware of the obstacles in your flying area so you can manually avoid them without having to rely on the sensors.<br><br>The sensors are not foolproof. They can sometimes fail to detect obstacles that are normally easily detectable. For example, the sensors could be confused by an obstacle that is reflecting light or the sun could be shining at just the right angle to cause the sensors to malfunction.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>59)<\/strong>&nbsp;Automated features are not foolproof<\/h5>\n\n\n\n<p>When using any of the automated features of your drone, always be ready to manually take over if something does not go as planned. Most automated flight modes and functions can be quickly exited by toggling the flight mode switch&nbsp;<em>(or sport mode switch)<\/em>&nbsp;on the remote controller.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>60)<\/strong>&nbsp;Stay clear of no fly zones<\/h5>\n\n\n\n<p>While your drone should not be able to fly into a no fly zone, it will auto land at its current location if it does manage to enter a no fly zone. That could happen if you take off with a poor GPS signal and then acquire a strong GPS signal after entering a no fly zone. Review the map in DJI GO&nbsp;<em>(or the&nbsp;<strong><a href=\"https:\/\/www.dji.com\/flysafe\/geo-map?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">GEO Zone Map<\/a><\/strong>&nbsp;on the DJI website)<\/em>&nbsp;so you\u2019re aware of any nearby no fly zones prior to each flight.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>61)<\/strong>&nbsp;Shutting down DJI GO on your mobile device does not disconnect the remote controller<\/h5>\n\n\n\n<p>If DJI GO disconnects from the drone, crashes, or your mobile device shuts down, the remote controller will still likely be connected to the drone. Since the drone is flown with the remote controller, you\u2019ll be in full control of your drone as long as the remote controller is connected to the drone.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>62)<\/strong>&nbsp;Don\u2019t fly underneath anything that could block the drone\u2019s GPS signal<\/h5>\n\n\n\n<p>The drone uses its internal GPS receiver to track its current location. Flying under obstacles will block the GPS signal to that receiver and cause the drone to automatically switch to ATTI mode&nbsp;<em>(where the drone does not hold its horizontal position)<\/em>. In ATTI mode, the drone could drift into a nearby obstacle when flying in close quarters.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>63)<\/strong>&nbsp;Pay attention to the messages displayed in DJI GO while flying<\/h5>\n\n\n\n<p>DJI GO might display important message mid-flight, so pay attention to what is going on in the app while you\u2019re flying.<br>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-Warning.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>You\u2019ll also be able to see the current flight mode at the top of DJI GO. That\u2019s important to monitor in case your drone automatically switches to ATTI mode<em>&nbsp;(for example)<\/em>.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>64)<\/strong>&nbsp;Avoid an accidental CSC mid-flight<\/h5>\n\n\n\n<p>A CSC&nbsp;<em>(cross stick command)<\/em>&nbsp;is used to start the motors. It can also be used to stop the motors when the drone is on the ground or even mid-flight.<br><br>Out of the box, most DJI drones will not allow you to accidentally do a CSC mid-flight. And some drones have an alternate CSC command that must be executed in order to stop the motors when the drone is in flight.<br><br>See your DJI drone manual for more details on how CSC works on your drone.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>65)<\/strong>&nbsp;Don\u2019t assume the altitude displayed in DJI GO is 100% correct<\/h5>\n\n\n\n<p>The current altitude displayed in DJI GO is the height above the takeoff point&nbsp;<em>(not the height from the ground at the drone\u2019s current location)<\/em>. This altitude is estimated using the drone\u2019s internal barometer.<br><br>If your drone has downward sensors and you\u2019re flying close enough to the ground, the distance to the closest obstacle below your drone will be displayed at the bottom of DJI GO.<br>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/www.phantomhelp.com\/Tips\/Images\/DJI-GO-VPS.jpg\" alt=\"\"\/><\/figure>\n\n\n\n<p>The VPS value is usually fairly accurate when the drone is flying completely level. If flying quickly in any direction, the drone will be tilted and that will skew the distance since the sensors will be pointed at an angle.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>66)<\/strong>&nbsp;The RTH button on the remote controller still works after the downlink drops<\/h5>\n\n\n\n<p>As long as the remote controller is connected to the drone, you can press and hold the RTH button&nbsp;<em>(or toggle the appropriate switch if flying a Phantom 3)<\/em>&nbsp;on the remote controller to initiate RTH. The remote controller will start beeping after RTH has been successfully initiated.<\/p>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Landing Tips<\/strong><\/h2>\n\n\n\n<p>These tips will help you safely land your DJI drone:<br>&nbsp;<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>67)<\/strong>&nbsp;Point the camera down to help find a safe landing spot<\/h5>\n\n\n\n<p>If the battery reaches the critically low level, your drone will start auto landing at its current location. While it\u2019s possible to steer the drone to a safer landing spot, there is no way to cancel the auto landing. Holding the throttle in the full up position will allow you to stop the drone from descending and give you time to reposition the drone for a better landing.<\/p>\n\n\n\n<p>If you point the camera staright down, you\u2019ll be able to quickly spot the safest available landing spot. You can think quickly navigate your drone to that location and then allow it to finish auto landing.<strong>Note:<\/strong>&nbsp;The battery will eventually shut off mid-flight if you keep the drone in the air too long. At the point, the drone will drop to the ground like a rock.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>68)<\/strong>&nbsp;Manually take over landing when the drone is in sight<\/h5>\n\n\n\n<p>If using an automated landing mode, you can quickly press and release the RTH button&nbsp;<em>(or toggle the appropriate switch if flying a Phantom 3)<\/em>&nbsp;on the remote controller to cancel the auto landing when the drone is in sight. That will allow you to take over and manually land the drone.<br><br>RTH usually works just fine if the drone is landing in a wide open area, but nothing is safer than a manual landing if you\u2019re comfortable controlling your drone. Not only will a manual landing allow you to land in the best spot, it will also allow you to gently touch down.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>69)<\/strong>&nbsp;Use a landing pad for Precision Landing or when landing on undesirable surfaces<\/h5>\n\n\n\n<p>If you need to launch or land from a wet and\/or dirty surface or in a location with tall grass (<em>or anything that could potentially come into contact with the camera, gimbal, or props)<\/em>, a landing pad will give you a flat\/clean\/dry platform. A landing pad could also be used to create a unique pattern on the ground for Precision Landing in a case where there is no distinct pattern on the ground&nbsp;<em>(like when taking off from a large grassy area)<\/em>.<br><br>Here are a few commonly used landing pads:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong><a href=\"https:\/\/www.phantomhelp.com\/Amazon\/E1TOvDEVDRLFET2\" target=\"_blank\" rel=\"noreferrer noopener\">Hoodman<\/a><\/strong>&nbsp;<em>(round landing pad)<\/em><\/li><li><strong><a href=\"https:\/\/www.phantomhelp.com\/Amazon\/E4ODJUk9PSdglk5\" target=\"_blank\" rel=\"noreferrer noopener\">PGYTECH<\/a><\/strong>&nbsp;<em>(round landing pad)<\/em><\/li><li><strong><a href=\"https:\/\/www.phantomhelp.com\/Amazon\/E3ODqKOfZjmSgd5\" target=\"_blank\" rel=\"noreferrer noopener\">Freewell Gear<\/a><\/strong>&nbsp;<em>(square landing pad)<\/em><\/li><\/ul>\n\n\n\n<p><strong>Note:<\/strong>&nbsp;Lightweight landing pads can tip over in the wind, so make sure you\u2019re using a landing pad that's weighted or can be pinned down in the corners. If you\u2019re using a landing pad often, investing in a&nbsp;<strong><a href=\"https:\/\/www.phantomhelp.com\/Amazon\/E1TOvDEVDRLFET2\" target=\"_blank\" rel=\"noreferrer noopener\">Hoodman landing pad<\/a><\/strong>&nbsp;would be well worth the investment since it contains steel weights around the perimeter of the landing pad.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>70)<\/strong>&nbsp;Face your drone away from you when landing for easier control<\/h5>\n\n\n\n<p>Before descending to the ground, yaw&nbsp;<em>(turn)<\/em>&nbsp;the drone so it\u2019s facing away from you. That will likely make it easier to control since the controls feel more natural when the drone is pointed away from you.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>71)<\/strong>&nbsp;Hand catch your drone if it\u2019s not safe to land on the ground<\/h5>\n\n\n\n<p>As an alternative to using a landing pad or when landing in a location where it\u2019s not safe to land on the ground, you can catch the drone in your hand. This can be dangerous since your hands will be close to the props, so map out a plan of action before you attempt a hand catch.<strong>Note:<\/strong>&nbsp;If your drone has downward sensors and the&nbsp;Landing Protection&nbsp;setting is enabled in DJI GO, the drone could forcefully pull away from your hand if you attempt to grab it and pull it down.<\/p>\n\n\n\n<p><br>Here are a few videos that show how to safely hand catch a DJI drone:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"https:\/\/www.youtube.com\/watch?v=QQ287joX_I0\" target=\"_blank\" rel=\"noreferrer noopener\">Hand catching a&nbsp;<strong>Phantom<\/strong><\/a>&nbsp;<em>(Tom's Tech Time)<\/em><\/li><li><a href=\"https:\/\/www.youtube.com\/watch?v=GQ1XqzNFVog\" target=\"_blank\" rel=\"noreferrer noopener\">Hand catching a&nbsp;<strong>Mavic<\/strong><\/a>&nbsp;<em>(Michael Kincaid)<\/em><\/li><li><a href=\"https:\/\/www.youtube.com\/watch?v=LXJQyjR2fvE\" target=\"_blank\" rel=\"noreferrer noopener\">Hand catching a&nbsp;<strong>Mavic<\/strong><\/a>&nbsp;<em>(Sky View Aerial)<\/em><\/li><\/ul>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Safety Tips<\/strong><\/h2>\n\n\n\n<p>Here are some general tips to help you safely fly your DJI drone:<br>&nbsp;<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>72)<\/strong>&nbsp;Don\u2019t fly indoors<\/h5>\n\n\n\n<p>Unless you\u2019re flying in a large open building like a gymnasium, flying indoors is usually not a safe thing to do. Poor lighting, tight quarters, lots of surrounding obstacles, nearby people, and\/or lack of a GPS signal are all ingredients that could result in an expensive disaster.<strong>Note:<\/strong>&nbsp;If you must fly indoors, use props guards to help prevent the props from coming into contact with nearby obstacles. You can find OEM DJI prop guards for your drone in the&nbsp;<strong><a href=\"https:\/\/store.dji.com\/?ch=ddhdp&amp;from=dap_unique&amp;pbc=D3IDBfR5&amp;pm=custom\" target=\"_blank\" rel=\"noreferrer noopener\">DJI Store<\/a><\/strong>.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>73)<\/strong>&nbsp;Use lights when flying at night<\/h5>\n\n\n\n<p>When flying at night, you can attach lights to your drone to allow both you and other people to easily spot your drone in the air.<br><br><strong><a href=\"https:\/\/www.phantomhelp.com\/store\/strobon-cree-led-strobe-light\" target=\"_blank\" rel=\"noreferrer noopener\">STROBON Cree strobe lights<\/a><\/strong>&nbsp;are a popular option since they are currently the smallest and brightest strobe lights available.&nbsp;<strong><a href=\"http:\/\/www.mavichelp.com\/Amazon\/E4OWDKnGcZTYke2\" target=\"_blank\" rel=\"noreferrer noopener\">Firehouse ARC lights<\/a><\/strong>&nbsp;are another good option since they use the same Cree LED lights.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>74)<\/strong>&nbsp;Fly with a recommended mobile device<\/h5>\n\n\n\n<p>To ensure good performance when flying with DJI GO, it's important to use a mobile device that is known to work well. A list of supported and commonly used tablets and phones can be found&nbsp;<strong><a href=\"https:\/\/www.phantomhelp.com\/tips\/best-tabletsphones-for-dji-go-updated-daily.18\" target=\"_blank\" rel=\"noreferrer noopener\">here<\/a><\/strong>. For best results, choose a mobile device that has decent specs and a bright screen.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\"><strong>75)<\/strong>&nbsp;Set up your mobile device properly so it performs well<\/h5>\n\n\n\n<p>Apply&nbsp;<strong><a href=\"https:\/\/www.phantomhelp.com\/Tips\/install-dji-go-on-an-apple-tablet-or-phone-step-by-step-guide.34\" target=\"_blank\" rel=\"noreferrer noopener\">these tips<\/a><\/strong>&nbsp;<em>(for&nbsp;<strong>Apple&nbsp;<\/strong>devices)<\/em>&nbsp;or&nbsp;<strong><a href=\"https:\/\/www.phantomhelp.com\/Tips\/install-dji-go-on-an-android-tabletphone-step-by-step-guide.31\" target=\"_blank\" rel=\"noreferrer noopener\">these tips<\/a><\/strong>&nbsp;<em>(for&nbsp;<strong>Android<\/strong>&nbsp;devices)<\/em>&nbsp;to ensure both your mobile device and DJI GO are configured to run as efficiently as possible.<br><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Someone (msinger) painstakingly compiled this. I'm copying here to prevent broken link in the future. (Source: https:\/\/www.mavichelp.com\/tips\/prevent-a-crash-or-flyaway-with-your-mavic.40) Prevent a Crash or Flyaway with Your DJI Drone (The Complete Guide) Overview This guide will teach you everything you need to know &hellip; <a href=\"http:\/\/nycphantom.com\/journal\/?p=8480\">Continue reading <span class=\"meta-nav\">&rarr;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-8480","post","type-post","status-publish","format-standard","hentry","category-technical"],"_links":{"self":[{"href":"http:\/\/nycphantom.com\/journal\/index.php?rest_route=\/wp\/v2\/posts\/8480","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/nycphantom.com\/journal\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/nycphantom.com\/journal\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/nycphantom.com\/journal\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/nycphantom.com\/journal\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=8480"}],"version-history":[{"count":3,"href":"http:\/\/nycphantom.com\/journal\/index.php?rest_route=\/wp\/v2\/posts\/8480\/revisions"}],"predecessor-version":[{"id":8484,"href":"http:\/\/nycphantom.com\/journal\/index.php?rest_route=\/wp\/v2\/posts\/8480\/revisions\/8484"}],"wp:attachment":[{"href":"http:\/\/nycphantom.com\/journal\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=8480"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/nycphantom.com\/journal\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=8480"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/nycphantom.com\/journal\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=8480"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}