I went to a workshop by Jerry Lodriguss at Adorama last Sunday and confirmed that you don't need filters just to get colors in the stars. Also, I heard it was mentioned that it is possible to do Milky-way level astrophotography in light polluted city. I did not find out how (I researched on it long ago to no avail), until now, when someone posted something similar on Facebook.
Pasted (both of them) here just in case:
(1) Stars in the city
Updated 4 minutes ago · Taken at 36 day street, auckland
Had a look at this awesome article by Justin Ng Photography on how he shot beautiful milkyway images from light polluted singapore sky.http://petapixel.com/2014/
I tried this ETTR method a while ago and really did get some results, but back then did not have enough skills to process them further, since then i have now picked up some more skills and gave a try again.
I went downstairs and shot some Milkyway from the city, i could only see antares, so i knew where to shoot.
The album contains 5 images:
1) 20sec, ISO 1600, f8 (foreground)
2) 20sec, ISO 1600, f2.8 (sky)
3) Masking and exposure blending in Photoshop CC
4) Extra processing on the masked image
5) Comparison of all the images
All images were shot using Samyang 24mm lens on Canon 6D
Auckland Astronomical Society International Dark-Sky Association Milky Way Scientists
######################################
(2) How I Photograph the Milky Way in the Light-Polluted Skies of Singapore
When it comes to photographing the elusive Milky Way in one of the most light-polluted major cities like Singapore, timing is critical. Most of the faint details will be washed out by the extreme light pollution and if we were to shoot the Milky Way under unfavorable atmospheric conditions, our attempt would be futile.
Unfortunately, most of the tutorials online only work in locations that are at least 2 stops darker than most of the dark locations in Singapore and so, we need to do more in post-processing to unveil the elusive Milky Way and more complex workflow is required if we’re shooting at much brighter locations.
In this tutorial, I am going to show you how I shoot the Milky Way that’s obscured by the heavy light pollution in Singapore using photography equipment that you may already have and a workflow that probably works in most versions of Photoshop without purchasing additional plugins.
Equipment I Am Using to Shoot the Milky Way in Singapore
- Unmodified full-frame DSLR camera (Canon 5D Mark II)
- Wide angle lens (Canon 16-35mm f/2.8)
- Tripod
- Intervalometer
- Memory cards and batteries
Step 1
If the atmospheric conditions are favorable, locate the Milky Way using mobile apps like Star Walk or SkySafari for example. I have developed a simple app for the same purpose too and it can be downloaded here.
Step 2
Switch to Bulb mode on your DSLR camera and set the aperture to 2.8, ISO to 6400 and focal length to 16mm. Remember to shoot in RAW format.
Step 3
I use a technique called Expose To The Right (ETTR), a concept that’s been around for more than a decade, to obtain the maximum amount of signals possible with a single exposure. You can produce an ETTR image by pushing its histogram to the far right by increasing the exposure during your shoot. I took mine at 16mm, F2.8, ISO6400 and I exposed my camera for 9 seconds.
The ETTR technique, however, has its limitations and using just this technique alone won’t work for most parts of Singapore and so further processing is required to bring out the best of what’s recorded in the RAW file. A more complex workflow is required if I shoot from a brighter location.
Step 4
Normalize the image by playing around with the sliders until you’re able to see the elusive Milky Way!
Step 5
At this juncture, if you’re shooting at a location that’s at least 2 stops darker than mine, which also means you are able to expose your camera for 30 to 40 seconds using the same settings (F2.8, ISO6400 @ 16mm), then you’ll probably be able to get away with a nice image by adjusting the sliders. But unfortunately, we need to do more to make the image pop when it’s taken in Singapore and the post-processing workflow will become more complex if the exposure time is reduced to 5 seconds or less at much brighter locations.
In Photoshop, click on Image -> Adjustments -> HDR Toning. Then play around with the Detail slider along with the rest to achieve to look you want and mask out the overexposed part of the image.
Step 6
From here onwards, you can tweak the image to your own liking!
So there you go! Thanks to Photoshop that we can now enhance the data that were recorded in the RAW file to unveil the beautiful Milky Way galaxy which we can’t see with our naked eyes in Singapore. But does Photoshop make the Sentosa image above any less real?
There are definitely many ways to achieve the same or better result and this is just one of the workflows that you can use without purchasing additional Photoshop plugins. As Singapore offers varying degrees of light pollution, different workflows will be required to unveil the elusive Milky Way taken at different locations.
For a full tutorial, please visit the post on my website here.
Here’s some of my images taken in Singapore. Note that not all images below were processed using the workflow presented in this tutorial:
About the author: Starting out as a self-taught photographer in September 2010, Justin Ng has garnered his photographic experience from a diverse range of subjects, events and locations eventually earning recognition and publication in world-famous media sources like the BBC, CNN, National Geographic, Yahoo!, Space.com, EarthSky, and UniverseToday, just to name a few.
Justin was published as Asia’s top 30 photographers by Signature Weddings, listed as top 6 landscape photographers in the world by Pixoto and recently, he has been named as Canon EOS World Photographer of the Year 2013. He is currently a writer/content contributor at Space.com and SLR Lounge.
To see more of his work, be sure to visit his website or follow him on Facebook, Twitter, Google+, 500px or Instagram. This article originally appeared here.